This website uses cookies to enhance your experience.

GOCUT 322 | 3 inch submersible sewage pump with three phase 2,2 kW motor

Item No. PRGC322-1
The PRORIL GOCUT series of electric submersible cutter pumps are fitted as standard with a semi-open impeller. A cutting mechanism shreds fibrous materials into small pieces to prevent from clogging. This submersible wastewater pump is suitable for pumping sewage water and can run dry without any
This product cannot be ordered at the moment.
Description
The PRORIL GOCUT series of electric submersible cutter pumps are fitted as standard with a semi-open impeller. A cutting mechanism shreds fibrous materials into small pieces to prevent from clogging. This submersible wastewater pump is suitable for pumping sewage water and can run dry without any problems.
 
The GOCUT models are widely used for;
  • Submersible sewage cutter pump 
  • Pumping of long fibrous materials
  • Submersible wastewater pump 
  • Submersible dirty water pump
The submersible pump is fitted for use with a guide rail system making it easier to use for above-ground maintenance and inspection work.

Also available with a submersible pump float switch for automatic start and stop based on changes to the water level.

GOCUT 322GOCUT 337GOCUT 437
Discharge outlet3" BSP thread3" BSP thread4" BSP thread
Motor output2,2 kW3,7 kW3,7 kW
Phase / voltage3 phase / 400V 50 Hz3 phase / 400V 50 Hz3 phase / 400V 50 Hz
Max. flow54 m3/h (900 l/min)72 m3/h (1200 l/min)78 m3/h (1300 l/min)
Max. head18 mwc20 mwc18 mwc
Free passage27 mm37 mm37 mm
Dimensions D x HØ 482 mm x 642 mmØ 482 mm x 642 mmØ 482 mm x 642 mm
Weight w/o cable55 kg59,5 kg59,5 kg
Cable length10 m10 m10 m
    Loading
    Loading