Deutsch
Français
GOCUT 315 | 3 inch submersible sewage pump with three phase 1,5 kW motor
Item No.
PRGC315-1
The PRORIL GOCUT series of electric submersible cutter pumps are fitted as standard with a semi-open impeller. A cutting mechanism shreds fibrous materials into small pieces to prevent from clogging. This submersible wastewater pump is suitable for pumping sewage water and can run dry without any
Description
The PRORIL GOCUT series of electric submersible cutter pumps are fitted as standard with a semi-open impeller. A cutting mechanism shreds fibrous materials into small pieces to prevent from clogging. This submersible wastewater pump is suitable for pumping sewage water and can run dry without any problems.
The GOCUT models are widely used for;
Also available with a submersible pump float switch for automatic start and stop based on changes to the water level.
The GOCUT models are widely used for;
- Submersible sewage cutter pump
- Pumping of long fibrous materials
- Submersible wastewater pump
- Submersible dirty water pump
Also available with a submersible pump float switch for automatic start and stop based on changes to the water level.
| GOCUT 215 | GOCUT 315 | |
|---|---|---|
| Discharge outlet | 2" BSP thread | 3" BSP thread |
| Motor output | 1,5 kW | 1,5 kW |
| Phase / voltage | 3 phase / 400V 50 Hz | 3 phase / 400V 50 Hz |
| Max. flow | 30 m3/h (500 l/min) | 39 m3/h (650 l/min) |
| Max. head | 16 mwc | 16 mwc |
| Free passage | 25 mm | 25 mm |
| Dimensions D x H | Ø 301 mm x 463 mm | Ø 301 mm x 463 mm |
| Weight w/o cable | 26,5 kg | 26,5 kg |
| Cable length | 10 m | 10 m |
Also available in 230 Volt (GOCUT 215S & GOCUT 315S)
Downloads