Deutsch
Français
STORMY 475(P) | 4 inch submersible slurry pump with agitator and three phase 7,5 kW motor
Item No.
PRST475P-1
The PRORIL STORMY series of abrasion resistant electric submersible slurry pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The agitator forces solids loose, after which a mix of water and slurry can be pumped out.
This
This
Description
The PRORIL STORMY series of abrasion resistant electric submersible slurry pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The agitator forces solids loose, after which a mix of water and slurry can be pumped out.
This heavy duty submersible agitator pump with semi-open strainer creates a vertical underwater flow, it can run dry without problems and is well suited for pumping abrasive liquids such as slurry and sand.
This heavy duty submersible agitator pump with semi-open strainer creates a vertical underwater flow, it can run dry without problems and is well suited for pumping abrasive liquids such as slurry and sand.
| STORMY 475P | STORMY 475S | |
|---|---|---|
| Discharge outlet | 4" BSP thread | 4" BSP thread |
| Motor output | 7,5 kW | 7,5 kW |
| Phase / voltage | 3 phase / 400V 50 Hz | 3 phase / 400V 50 Hz |
| Max. flow | 149 m3/h (2480 l/min) | 149 m3/h (2480 l/min) |
| Max. head | 18,5 mwc | 18,5 mwc |
| Free passage | 25 mm | 25 mm |
| Dimensions D x H | Ø 420 mm x 826 mm | Ø 412 mm x 826 mm |
| Weight w/o cable | 124 kg | 132 kg |
| Cable length | 20 m | 20 m |
Available with open stand (P) or with strainer (S).
Downloads