Deutsch
Français
STORMY 6220(S) | 6 inch submersible sand pump with agitator and three phase 22 kW motor
Item No.
PRST6220S-1
The PRORIL STORMY series of wear-resistant electric submersible sand pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The sediment is forced loose with the agitator, after which a mix of water and sand can be pumped
Description
The PRORIL STORMY series of wear-resistant electric submersible sand pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The sediment is forced loose with the agitator, after which a mix of water and sand can be pumped out.
This heavy duty submersible agitator pump with closed strainer creates a horizontal underwater flow, it can run dry without problems and is suitable for pumping sand and other high density liquids.
This heavy duty submersible agitator pump with closed strainer creates a horizontal underwater flow, it can run dry without problems and is suitable for pumping sand and other high density liquids.
| STORMY 6220(S) | STORMY 8220(S) | |
|---|---|---|
| Discharge outlet | 6" BSP thread | 8" BSP thread |
| Motor output | 22 kW | 22 kW |
| Phase / voltage | 3 phase / 400V 50 Hz | 3 phase / 400V 50 Hz |
| Max. flow | 300 m3/h (5000 l/min) | 390 m3/h (6500 l/min) |
| Max. head | 30 mwc | 24 mwc |
| Free passage | 30 mm | 37 mm |
| Dimensions D x H | Ø 592 mm x 1210 mm | Ø 592 mm x 1172 mm |
| Weight w/o cable | 357 kg | 367 kg |
| Cable length | 20 m | 20 m |
Also available with open stand (STORMY 6220(P) & STORMY 8220(P))
Downloads